Tag Archives: frequency
VL-BRC09-E – NMEA-Ethernet Converter
VL-BRC09-E – NMEA-Ethernet Converter (according to IEC 60945)
The VL-BRC09-E converts the adjustable baud rate of input NMEA telegrams on an RS422 interface. The telegrams are transmitted through both the RS422 and the Ethernet interface with 10/100 Mbit. Telegrams received through Ethernet are output as NMEA via the RS422. The component has been successfully tested according to IEC 60945 and thus can be employed in the bridge area of seagoing vessels. It is possible to receive NMEA telegrams with an adjustable baud rate of 4800 bps to 38400 bps and send these telegrams with a separately adjustable baud rate of 4800 bps up to 115200 bps. With an additional parameter the output frequency of the last telegram received can be set.
Main features:
Dimensions | 110mm x 42mm x 55mm (length x width x height) |
Microcontroller | P89V664FA Kbyte Flash Rom and 2 Kbyte SRAM on Chip, Watchdog |
1x full duplex UART | |
Power supply | UB = +9…32V / Pv approx. 2.4 W; |
inverse-polarity protection and self-healing fuse 1.5A | |
Plug connector | Wago clamp-connections |
Connections up to 2,5mm² | |
Communication | 1x RS422 galvanic isolated and, optionally, Ethernet |
Additional features | With jumper´s following modifications and situations are possible: RS 422 mode or RS 485 mode; bus termination on module, reset, parameter input and firmware update |
Converters and Inerfaces, Systems, Video, PCI Devices & Applications
1NMEA to2_2 | 1NMEA to4 | 1NMEA to8 | 2NMEA to12 | VL-SDN | 2NMEA to2R | 4NMEA to1 | 8NMEA to1-E | EPC09 | VL-ASU08 | 1NMEA to2 | VL-BRC08 | VL-N2A | VL-BRC09-E| VL-SDU08 | Gyro Repeater | 1CF oIP / 2,5 | 1CF oIP / 1,5 | LAN 5CH / 1,5 | LAN 5CH / 2,5 | LAN 8CH / 2,5 | M485 Wireless | SLIF P2S3 / 1,5 | STIF A2D8 / 1,5 | STIF A2D8 / 2,5 | STIF A4D16 / 1,5 | STIF A4D16 / 2,5 | VL-24/6,5/2A | VL-PSG001 | ALR-EXT | PC-EXT | DCU 5 | SBPS | VL-DA | Wind & Weather | RLC | VL-LAS08