Tag Archives: baud rate

VL-BRC08 – Baud Rate converter


VL-BRC08 – Baud Rate converter

The baud rate converter is a software version based on the successfully type approved IEC 60945 MCU5 hardware. The basic function of the system is to receive NMEA telegrams with an adjustable baud rate from 4800 bps up to 38400 bps and send these telegrams with a separately adjustable baud rate from 4800 bps up to 115200 bps. With an additional parameter also the output frequency is alterable.


Main features:

Dimensions 110mm x 42mm x 55mm (length x width x height)
Microcontroller P89V664FA Kbyte Flash Rom and 2 Kbyte SRAM on Chip, Watchdog
  1x full duplex UART
Power supply UB = +9…32V / Pv approx. 2,4 W;
  inverse-polarity protection and self-healing fuse 1,5A
Plug connector Wago clamp-connections
  Connections up to 2,5mm²
Communication 1x RS 422 galvanic isolated
Additional features With jumper´s following modifications and situations are possible: RS 422 mode or RS 485 mode; bus termination on module, reset, parameter input and firmware update